6.3 Drive Alarms, Faults, and Errors
242 YASKAWA ELECTRIC SIEP C710606 44B YASKAWA AC Drive T1000V Technical Manual
■ Operation Errors
Table 6.7 Operation Error Displays
■ Auto-Tuning Errors
Table 6.8 Auto-Tuning Error Displays
LED Operator Display Name Page
oPE01 Drive Unit Setting Error 263
oPE02 Parameter Setting Range Error 263
oPE03 Multi-Function Input Setting Error 263
oPE04 Terminal Board Mismatch Error 264
oPE05 Run Command Source Error 264
oPE07 Multi-Function Analog Input Selection Error 264
oPE08 Parameter Selection Error 264
oPE09 PID Control Selection Error 265
oPE10 V/f Data Setting Error 265
oPE11 Carrier Frequency Setting Error 265
oPE13 Pulse Train Monitor Selection Error 265
LED Operator Display Name Page
End1 Excessive V/f Setting 266
End2 Motor Iron Core Saturation Coefficient Error 266
End3 Rated Current Setting Alarm 266
Er-01 Motor Data Error 266
Er-02 Alarm 266
Er-03 STOP button Input 267
Er-04 Line-to-Line Resistance Error 267
Er-05 No-Load Current Error 267
Er-08 Rated Slip Error 267
Er-09 Acceleration Error 267
Er-11 Motor Speed Error 267
Er-12 Current Detection Error 268
To Next Page
Loading...
