E.2 Basic Parameter Settings
YASKAWA ELECTRIC SIEP C710606 44B YASKAWA AC Drive T1000V Technical Manual 425
E.2 Basic Parameter Settings
Use these tables to keep record of the most important parameters. Have these data available when contacting the
technical support.
◆ Basic Setup
◆ V/f Pattern Setup
◆ Motor Setup
◆ Multi-Function Digital Inputs
◆ Pulse Train Input/Analog Inputs
◆ Multi-Function Digital Outputs
Item Setting Value Memo Item Setting Value Memo
Control Mode A1-02 =
Frequency Reference
Source
b1-01 =
Normal/Heavy Duty
Selection
C6-01 =
Run Command Source b1-02 =
Item Setting Value Memo Item Setting Value Memo
V/f Pattern Selection E1-03 = Middle Output Frequency E1-07 =
Max. Output Frequency E1-04 = Mid. Output Freq. Voltage E1-08 =
Maximum Voltage E1-05 = Min. Output Frequency E1-09 =
Base Frequency E1-06 = Min. Output Freq. Voltage E1-10 =
Item Setting Value Memo Item Setting Value Memo
Induction
Motor
Motor Rated Current E2-01 = Number of Motor Poles E2-04 =
Motor Rated Slip E2-02 = Line-to-Line Resistance E2-05 =
Motor No-Load Current E2-03 = Motor Leakage Inductance E2-06 =
PM
Motor
Motor Code Selection E5-01 = Motor d-Axis Inductance E5-06 =
Motor Rated Power E5-02 = Motor q-Axis Inductance E5-07 =
Motor Rated Current E5-03 = Induction Volt. Const.1 E5-09 =
Number of Motor Poles E5-04 = Induction Volt. Const. 2 E5-24 =
Motor Stator Resistance E5-05 =
Terminal
Input
Used
Setting Value and
Function Name
Memo Terminal
Input
Used
Setting Value and
Function Name
Memo
S1 H1-01 = S4 H1-04 =
S2 H1-02 = S5 H1-05 =
S3 H1-03 = S6 H1-06 =
Terminal Input Used Setting Value and Function Name Memo
RP H6-01 =
A1 H3-02 =
A2 H3-10 =
Terminal Output Used Setting Value and Function Name Memo
MA/MB/MC H2-01 =
P1-C1 H2-02 =
P2-C2 H2-03 =
To Next Page
Loading...
