4.3 The Drive and Programming Modes
YASKAWA ELECTRIC SIEP C710606 44B YASKAWA AC Drive T1000V Technical Manual 79
Start-Up Programming
& Operation
4
◆ Navigating the Drive and Programming Modes
The drive is set to operate in Drive Mode when it is first powered up. Switch between display screens by using the
and keys.
Power Up
Frequency Reference
Default Setting
This display screen allows the user to monitor and set the frequency reference while the
drive is running. Refer to The Drive and Programming Modes on page 78.
Note: The user can select items to display when the drive is first powered up by setting
parameter o1-02.
Drive Mode
Forward/Reverse
: Motor rotates forward.
: Motor rotates in reverse.
Note: For applications that should not run in reverse, set parameter b1-04 = “1” to prohibit
the motor from rotating in reverse. This sequence also puts the drive in LOCAL mode.
Output Frequency Display
Monitors the frequency output by the drive.
Output Current Display
Monitors the output current of the drive.
Output Voltage Reference
(Default setting)
Scroll through o1-01 (User Monitor Selection) until the desired contents appear. Refer
to Parameter List on page 317
Monitor Display
Monitor parameters (U parameters) are displayed.
STOP
The LED is lit when
LOCAL is selected
Switching to reverse:
To Next Page
Loading...
