Yealink SIP-T48G Administrator's Guide

Getting Started
83
Half-duplex
Half-duplex transmission refers to transmitting voice or data in both directions, but in
one direction at a time; this means one device can send data on the line, but not
receive data simultaneously. You can configure the half-duplex transmission on both
Internet port and PC port for the IP phone to transmit in 10Mbps or 100Mbps.
Full-duplex
Full-duplex transmission refers to transmitting voice or data in both directions at the
same time; this means one device can send data on the line while receiving data. You
can configure the full-duplex transmission on both Internet port and PC port for the IP
phone to transmit in 10Mbps, 100Mbps or 1000Mbps (1000Mbps is only applicable to
SIP-T48G/T46G/T42G/T29G/T23G/CP860 IP phones).
Procedure
The transmission methods of Ethernet ports can be configured using the configuration
files or locally.
Configuration File
<y0000000000xx>.cfg
Configure the transmission methods
of the Internet (WAN) port.
Parameters:
network.internet_port.speed_duplex

Yealink SIP-T48G Specifications

General

Expansion module support	Yes
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Volume control	-
Display diagonal	7 \
Display resolution	800 x 480 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	6
AC adapter input voltage	100 - 240 V
Number of handles included	1 pc(s)

Weight and Dimensions

Width	266 mm
Height	185 mm