Yealink SIP-T48G

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
90
auto_provision.weekly.dayofweek
Specify the access URL of firmware.
Parameter:
firmware.url
Local
Web User Interface
Configure the way for the IP phone to
check for configuration files.
Navigate to:
http://<phoneIPAddress>/servlet?p=s
ettings-autop&q=load
Upload firmware.
Navigate to:
http://<phoneIPAddress>/servlet?p=s
ettings-upgrade&q=load
Details of Configuration Parameters:
Parameters
Permitted Values
Default
auto_provision.power_on
0 or 1
1
Description:
Triggers the power on feature to on or off.
0-Off
1-On
If it is set to 1 (On), the IP phone will perform an auto provisioning process when
powered on.
Web User Interface:
Settings->Auto Provision->Power On
Phone User Interface:
None
auto_provision.repeat.enable
0 or 1
0
Description:
Triggers the repeatedly feature to on or off.
0-Off
1-On
If it is set to 1 (On), the IP phone will perform an auto provisioning process
repeatedly.
Web User Interface: