Yealink SIP-T48G

Getting Started
91
Parameters
Permitted Values
Default
Settings->Auto Provision->Repeatedly
Phone User Interface:
None
auto_provision.repeat.minutes
Integer from 1 to 43200
1440
Description:
Configures the interval (in minutes) for the IP phone to perform an auto provisioning
process repeatedly.
Note: It works only if the value of the parameter “auto_provision.repeat.enable” is
set to 1 (On).
Web User Interface:
Settings->Auto Provision->Interval(Minutes)
Phone User Interface:
None
auto_provision.weekly.enable
0 or 1
0
Description:
Triggers the weekly feature to on or off.
0-Off
1-On
If it is set to 1 (On), the IP phone will perform an auto provisioning process weekly.
Web User Interface:
Settings->Auto Provision->Weekly
Phone User Interface:
None
auto_provision.weekly.begin_time
Time from 00:00 to 23:59
00:00
Description:
Configures the begin time of the day for the IP phone to perform an auto
provisioning process weekly.
Note: It works only if the value of the parameter “auto_provision.weekly.enable” is
set to 1 (On).
Web User Interface:
Settings->Auto Provision->Time
Phone User Interface: