Yealink SIP-T48G Administrator's Guide

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
98
Talk/Dial Power Light On
Talk/Dial Power Light On allows the power indicator LED to be turned on when the IP
phone is busy.
Procedure
Power indicator LED can be configured using the configuration files or locally.
Configuration File
<y0000000000xx>.cfg
Configure the power indicator LED.
Parameters:
phone_setting.common_power_le
d_enable
phone_setting.ring_power_led_flas
h_enable
phone_setting.mail_power_led_fla
sh_enable
phone_setting.mute_power_led_fl
ash_enable
phone_setting.hold_and_held_po
wer_led_flash_enable
phone_setting.talk_and_dial_powe
r_led_enable
Local
Web User Interface
Configure the power indicator LED.
Navigate to:
http://<phoneIPAddress>/servlet?
p=features-powerled&q=load
Details of Configuration Parameters:
Parameters
Permitted
Values
Default
phone_setting.common_power_led_enable
0 or 1
0
Description:
Enables or disables the power indicator LED to be turned on.
For SIP-T48G/T46G/T42G/T41P/T40P/T29G/T27P/T23P/T23G/T21(P) E2 IP phones:
0-Disabled (power indicator LED is off)
1-Enabled (power indicator LED is solid red)
For SIP-T19(P) E2 IP phones:
0-Disabled (power indicator LED is off)
1-Enabled (power indicator LED is solid green)

Yealink SIP-T48G Specifications

General

Expansion module support	Yes
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Volume control	-
Display diagonal	7 \
Display resolution	800 x 480 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	6
AC adapter input voltage	100 - 240 V
Number of handles included	1 pc(s)

Weight and Dimensions

Width	266 mm
Height	185 mm