Yealink SIP-T48G - Page 119

Configuring Basic Features
99
Parameters
Permitted
Values
Default
Note: It is not applicable to CP860 IP phones.
Web User Interface:
Features->Power LED->Common Power Light On
Phone User Interface:
None
phone_setting.ring_power_led_flash_enable
0 or 1
1
Description:
Enables or disables the power indicator LED to flash when the IP phone receives an
incoming call.
For SIP-T48G/T46G/T42G/T41P/T40P/T29G/T27P/T23P/T23G/T21(P) E2 IP phones:
0-Disabled (power indicator LED does not flash)
1-Enabled (power indicator LED fast flashes (300ms) red)
For SIP-T19(P) E2 IP phones:
0-Disabled (power indicator LED does not flash)
1-Enabled (power indicator LED fast flashes (300ms) green)
Note: It is not applicable to CP860 IP phones.
Web User Interface:
Features->Power LED->Ringing Power Light Flash
Phone User Interface:
None
phone_setting.mail_power_led_flash_enable
0 or 1
1
Description:
Enables or disables the power indicator LED to flash when the IP phone receives a
voice mail or a text message.
For SIP-T48G/T46G/T42G/T41P/T40P/T29G/T27P/T23P/T23G/T21(P) E2 IP phones:
0-Disabled (power indicator LED does not flash)
1-Enabled (power indicator LED slow flashes (1000ms) red)
For SIP-T19(P) E2 IP phones:
0-Disabled (power indicator LED does not flash)
1-Enabled (power indicator LED slow flashes (1000ms) green)
Note: It is not applicable to CP860 IP phones.
Web User Interface:
Features->Power LED->Voice/Text Mail Power Light Flash