Yealink SIP-T48G - Page 120

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
100
Parameters
Permitted
Values
Default
Phone User Interface:
None
phone_setting.mute_power_led_flash_enable
0 or 1
0
Description:
Enables or disables the power indicator LED to flash when a call is muted.
For SIP-T48G/T46G/T42G/T41P/T40P/T29G/T27P/T23P/T23G/T21(P) E2 IP phones:
0-Disabled (power indicator LED does not flash)
1-Enabled (power indicator LED fast flashes (300ms) red)
For SIP-T19(P) E2 IP phones:
0-Disabled (power indicator LED does not flash)
1-Enabled (power indicator LED fast flashes (300ms) green)
Note: It is not applicable to CP860 IP phones.
Web User Interface:
Features->Power LED->Mute Power Light Flash
Phone User Interface:
None
phone_setting.hold_and_held_power_led_flash_enable
0 or 1
0
Description:
Enables or disables the power indicator LED to flash when a call is placed on hold or is
held.
For SIP-T48G/T46G/T42G/T41P/T40P/T29G/T27P/T23P/T23G/T21(P) E2 IP phones:
0-Disabled (power indicator LED does not flash)
1-Enabled ( power indicator LED fast flashes (500ms) red)
For SIP-T19(P) E2 IP phones:
0-Disabled (power indicator LED does not flash)
1-Enabled ( power indicator LED fast flashes (500ms) green)
Note: It is not applicable to CP860 IP phones.
Web User Interface:
Features->Power LED->Hold/Held Power Light Flash
Phone User Interface:
None
phone_setting.talk_and_dial_power_led_enable
0 or 1
0