Yealink SIP-T48G

Configuring Basic Features
115
Configure the Bluetooth device
name.
Details of the Configuration Parameter:
Parameter
Permitted Values
Default
features.bluetooth_enable
0 or 1
0
Description:
Triggers Bluetooth mode to on or off.
0-Off
1-On
Note: It is only applicable to SIP-T48G/T46G/T29G IP phones.
Web User Interface:
Features->Bluetooth->Bluetooth Active
Phone User Interface:
Menu->Basic->Bluetooth->Bluetooth
features.bluetooth_adapter_name
String within 64
characters
Refer to the
following
content
Description:
Configures the Bluetooth device name.
For SIP-T48G IP phones:
The default value is Yealink-T48G.
For SIP-T46G IP phones:
The default value is Yealink-T46G.
For SIP-T29G IP phones:
The default value is Yealink-T29G.
Note: It works only if the value of the parameter “features.bluetooth_enable” is set to
1 (On). It is only applicable to SIP-T48G/T46G/T29G IP phones.
Web User Interface:
None
Phone User Interface:
Menu->Basic->Bluetooth->Bluetooth (On)->Edit My Device Information->Device
Name
To active the Bluetooth mode via web user interface:
1. Click on Features->Bluetooth.