Yealink SIP-T48G

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
118
Details of the Configuration Parameter:
Parameters
Permitted Values
Default
wifi.enable
0 or 1
0
Description:
Enables or disables Wi-Fi feature.
0-Disabled
1-Enabled
Note: It is only applicable to SIP-T48G IP phones.
Web User Interface:
Network->Wi-Fi->Wi-Fi Active
Phone User Interface:
Menu->Basic->Wi-Fi->Wi-Fi
wifi.X.label
(X ranges from 1 to 5)
String within 31
characters
Blank
Description:
Configures the profile name of the wireless network X for the IP phone.
Note: It works only if the value of the parameter “wifi.enable” is set to 1 (Enabled). It
is only applicable to SIP-T48G IP phones.
Web User Interface:
Network->Wi-Fi->Profile Name
Phone User Interface:
Menu->Basic->Wi-Fi->Wi-Fi (On)->Add->Profile Name
wifi.X.ssid
(X ranges from 1 to 5)
String within 32
characters
Blank
Description:
Configures the Service Set Identifier (SSID) of the wireless network X.
SSID is a unique identifier for accessing wireless access points.
Note: It works only if the value of the parameter “wifi.enable” is set to 1 (Enabled). It
is only applicable to SIP-T48G IP phones.
Web User Interface:
Network->Wi-Fi->SSID
Phone User Interface:
Menu->Basic->Wi-Fi->Wi-Fi (On)->Add->SSID