Yealink SIP-T48G

Configuring Basic Features
119
Parameters
Permitted Values
Default
wifi.X.priority
(X ranges from 1 to 5)
Integer from 1 to 5
1
Description:
Configures the priority for the wireless network X for the IP phone.
5 is the highest priority, 1 is the lowest priority.
Note: It works only if the value of the parameter “wifi.enable” is set to 1 (Enabled). It
is only applicable to SIP-T48G IP phones.
Web User Interface:
Network->Wi-Fi->Change Priority
Phone User Interface:
None
wifi.X.security_mode
(X ranges from 1 to 5)
NONE, WEP, WPA-PSK
or WPA2-PSK
NONE
Description:
Configures the security mode of the wireless network X.
Note: It works only if the value of the parameter “wifi.enable” is set to 1 (Enabled). It
is only applicable to SIP-T48G IP phones.
Web User Interface:
Network->Wi-Fi->Security Mode
Phone User Interface:
Menu->Basic->Wi-Fi->Wi-Fi (On)->Add->Security Mode
wifi.X.cipher_type
(X ranges from 1 to 5)
NONE, WEP, TKIP, CCMP
or TKIP CCMP
NONE
Description:
Configures the encryption type of the wireless network X.
NONE-NONE
WEP-WEP
TKIP-TKIP
CCMP-AES
TKIP CCMP-TKIP AES
Note: It works only if the value of the parameter “wifi.enable” is set to 1 (Enabled)
and “wifi.X.security_mode” is set to WPA-PSK or WPA2-PSK. It is only applicable to
SIP-T48G IP phones.
Web User Interface: