Yealink SIP-T48G

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
120
Parameters
Permitted Values
Default
Network->Wi-Fi->Cipher Type
Phone User Interface:
Menu->Basic->Wi-Fi->Wi-Fi (On)->Add->Cipher Type
wifi.X.password
(X ranges from 1 to 5)
String within 64
characters
Blank
Description:
Configures the password of the wireless network X.
Note: It works only if the value of the parameter “wifi.enable” is set to 1 (Enabled)
and “wifi.X.security_mode” is set to WEP, WPA-PSK or WPA2-PSK. It is only applicable
to SIP-T48G IP phones.
Web User Interface:
Network->Wi-Fi->PSK
Phone User Interface:
Menu->Basic->Wi-Fi->Wi-Fi (On)->Add->WPA Shared Key
To enable the Wi-Fi feature via web user interface:
1. Click on Network->Wi-Fi.
2. Select Enabled from the pull-down list of Wi-Fi Active.
3. Click Confirm to accept the change.
To add a wireless network via web user interface:
1. Click on Network->Wi-Fi.
2. Enter the desired value in the Profile Name field.