Yealink SIP-T48G

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
192
Procedure
Key as send can be configured using the configuration files or locally.
Configuration File
<y0000000000xx>.cfg
Configure a send key.
Parameter:
features.key_as_send
Configure a send sound.
Parameter:
features.send_key_tone
Configure a key tone.
Parameter:
features.key_tone
Local
Web User Interface
Configure a send key.
Navigate to:
http://<phoneIPAddress>/servlet
?p=features-general&q=load
Configure a send sound or key
tone.
Navigate to:
http://<phoneIPAddress>/servlet
?p=features-audio&q=load
Phone User Interface
Configure a send key.
Configure a key tone.
Details of Configuration Parameters:
Parameters
Permitted Values
Default
features.key_as_send
0, 1 or 2
1
Description:
Configures the "#" or "*" key as the send key.
0-Disabled
1-# key
2-* key
If it is set to 0 (Disabled), neither “#” nor “*” can be used as the send key.
If it is set to 1 (# key), the pound key is used as the send key.
If it is set to 2 (* key), the asterisk key is used as the send key.
Web User Interface: