Yealink SIP-T48G

Configuring Basic Features
193
Parameters
Permitted Values
Default
Features->General Information->Key As Send
Phone User Interface:
Menu->Features->Key as send
features.key_tone
0 or 1
1
Description:
Enables or disables the IP phone to play a key tone when a user presses any key on
your phone keypad.
0-Disabled
1-Enabled
If it is set to 1 (Enabled), the IP phone will play a key tone when a user presses any
key on your phone keypad.
Web User Interface:
Features->Audio->Key Tone
Phone User Interface:
Menu->Settings->Basic Settings->Sound->Key Tone
features.send_key_tone
0 or 1
1
Description:
Enables or disables the IP phone to play a key tone when a user presses a send key.
0-Disabled
1-Enabled
If it is set to 1 (Enabled), the IP phone will play a key tone when a user presses a
send key.
Note: It works only if the value of the parameter “features.key_tone” is set to 1
(Enabled).
Web User Interface:
Features->Audio->Send Tone
Phone User Interface:
None
To configure a send key via web user interface:
1. Click on Features->General Information.