Yealink SIP-T48G

Configuring Basic Features
249
Procedure
Auto redial can be configured using the configuration files or locally.
Configuration File
<y0000000000xx>.cfg
Configure auto redial feature.
Parameters:
auto_redial.enable
auto_redial.interval
auto_redial.times
Local
Web User Interface
Configure auto redial feature.
Navigate to:
http://<phoneIPAddress>/servlet
?p=features-general&q=load
Phone User Interface
Configure auto redial feature.
Details of Configuration Parameters:
Parameters
Permitted Values
Default
auto_redial.enable
0 or 1
0
Description:
Enables or disables the IP phone to automatically redial the dialed number when the
callee is temporarily unavailable.
0-Disabled
1-Enabled
If it is set to 1 (Enabled), the IP phone will dial the previous dialed out number
automatically when the dialed number is temporarily unavailable.
Web User Interface:
Features->General Information->Auto Redial
Phone User Interface:
Menu->Features->Auto Redial->Auto Redial
auto_redial.interval
Integer from 1 to 300
10
Description:
Configures the interval (in seconds) for the IP phone to wait between redials.
The IP phone redials the dialed number at regular intervals till the callee answers the
call.
Web User Interface:
Features->General Information->Auto Redial Interval (1~300s)