Yealink SIP-T48G Administrator's Guide

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
250
Parameters
Permitted Values
Default
Phone User Interface:
Menu->Features->Auto Redial->Redial Interval
auto_redial.times
Integer from 1 to 300
10
Description:
Configures the auto redial times when the callee is temporarily unavailable.
The IP phone tries to redial the dialed number as many times as configured till the
callee answers the call.
Web User Interface:
Features->General Information->Auto Redial Times (1~300)
Phone User Interface:
Menu->Features->Auto Redial->Redial Times
To configure auto redial via web user interface:
1. Click on Features->General Information.
2. Select the desired value from the pull-down list of Auto Redial.
3. Enter the waiting time in the Auto Redial Interval (1~300s) field.
The default waiting time is 10s.
4. Enter the desired times in the Auto Redial Times (1~300) field.
The default value is 10.
5. Click Confirm to accept the change.
To configure auto redial via phone user interface:
1. Press Menu->Features->Auto Redial.
2. Press or , or the Switch soft key to select the desired value from the Auto
Redial field.

Yealink SIP-T48G Specifications

General

Expansion module support	Yes
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Volume control	-
Display diagonal	7 \
Display resolution	800 x 480 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	6
AC adapter input voltage	100 - 240 V
Number of handles included	1 pc(s)

Weight and Dimensions

Width	266 mm
Height	185 mm