Yealink SIP-T48G

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
266
Parameters
Permitted Values
Default
Description:
Triggers the anonymous call feature to on or off for account X.
0-Off
1-On
If it is set to 1 (On), the IP phone will block its identity from showing up to the callee
when placing a call. The callee’s phone LCD screen presents anonymous instead of
the caller’s identity.
X ranges from 1 to 16 (for SIP-T48G/T46G/T29G)
X ranges from 1 to 12 (for SIP-T42G)
X ranges from 1 to 6 (for SIP-T41P/T27P)
X ranges from 1 to 3 (for SIP-T40P/T23P/T23G)
X ranges from 1 to 2 (for SIP-T21(P) E2)
X is equal to 1 (for SIP-T19(P) E2/CP860)
Web User Interface:
Account->Basic->Local Anonymous
Phone User Interface:
Menu->Features->Anonymous Call->Local Anonymous
account.X.send_anonymous_code
0 or 1
0
Description:
Configures the IP phone to send anonymous on/off code to activate/deactivate the
server-side anonymous call feature for account X.
0-Off Code
1-On Code
If it is set to 0 (Off Code), the IP phone will send anonymous off code to the server
when you deactivate the anonymous call feature.
If it is set to 1 (On Code), the IP phone will send anonymous on code to the server
when you activate the anonymous call feature.
X ranges from 1 to 16 (for SIP-T48G/T46G/T29G)
X ranges from 1 to 12 (for SIP-T42G)
X ranges from 1 to 6 (for SIP-T41P/T27P)
X ranges from 1 to 3 (for SIP-T40P/T23P/T23G)
X ranges from 1 to 2 (for SIP-T21(P) E2)
X is equal to 1 (for SIP-T19(P) E2/CP860)
Web User Interface: