Yealink SIP-T48G

Configuring Basic Features
313
Parameters
Permitted Values
Default
account.X.timeout_fwd.enable
0 or 1
0
Description:
Triggers no answer forward feature to on or off for account X.
0-Off
1-On
If it is set to 1 (On), incoming calls to the account X are forwarded to the destination
number after a period of ring time.
X ranges from 1 to 16 (for SIP-T48G/T46G/T29G)
X ranges from 1 to 12 (for SIP-T42G)
X ranges from 1 to 6 (for SIP-T41P/T27P)
X ranges from 1 to 3 (for SIP-T40P/T23P/T23G)
X ranges from 1 to 2 (for SIP-T21(P) E2)
Note: It works only if the value of the parameter “features.fwd_mode” is set to 1
(Custom). It is not applicable to SIP-T19(P) E2 and CP860 IP phones.
Web User Interface:
Features->Forward&DND->Forward->No Answer Forward->On/Off
Phone User Interface:
Menu->Features->Call Forward->No Answer Forward->No Answer Forward
account.X.timeout_fwd.target
String within 32
characters
Blank
Description:
Configures the destination number of the no answer forward for account X.
X ranges from 1 to 16 (for SIP-T48G/T46G/T29G)
X ranges from 1 to 12 (for SIP-T42G)
X ranges from 1 to 6 (for SIP-T41P/T27P)
X ranges from 1 to 3 (for SIP-T40P/T23P/T23G)
X ranges from 1 to 2 (for SIP-T21(P) E2)
Example:
account.1.timeout_fwd.target = 3603
Note: It works only if the value of the parameter “features.fwd_mode” is set to 1
(Custom). It is not applicable to SIP-T19(P) E2 and CP860 IP phones.
Web User Interface:
Features->Forward&DND->Forward->No Answer Forward->Target
Phone User Interface: