Yealink SIP-T48G

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
314
Parameters
Permitted Values
Default
Menu->Features->Call Forward->No Answer Forward->Forward to
account.X.timeout_fwd.timeout
Integer from 0 to
20
2
Description:
Configures ring times (N) to wait before forwarding incoming calls for account X.
Incoming calls will be forwarded when not answered after N*6 seconds.
X ranges from 1 to 16 (for SIP-T48G/T46G/T29G)
X ranges from 1 to 12 (for SIP-T42G)
X ranges from 1 to 6 (for SIP-T41P/T27P)
X ranges from 1 to 3 (for SIP-T40P/T23P/T23G)
X ranges from 1 to 2 (for SIP-T21(P) E2)
Note: It works only if the value of the parameter “features.fwd_mode” is set to 1
(Custom). It is not applicable to SIP-T19(P) E2 and CP860 IP phones.
Web User Interface:
Features->Forward&DND->Forward->No Answer Forward->After Ring
Time(0~120s)
Phone User Interface:
Menu->Features->Call Forward->No Answer Forward->After Ring Time
account.X.timeout_fwd.on_code
String within 32
characters
Blank
Description:
Configures the no answer forward on code to activate the server-side no answer
forward feature for account X. The IP phone will send the no answer forward on code
and the pre-configured destination number to the server when you activate no
answer forward feature for account X on the IP phone.
X ranges from 1 to 16 (for SIP-T48G/T46G/T29G)
X ranges from 1 to 12 (for SIP-T42G)
X ranges from 1 to 6 (for SIP-T41P/T27P)
X ranges from 1 to 3 (for SIP-T40P/T23P/T23G)
X ranges from 1 to 2 (for SIP-T21(P) E2)
Example:
account.1.timeout_fwd.on_code = *76
Note: It works only if the value of the parameter “features.fwd_mode” is set to 1
(Custom). It is not applicable to SIP-T19(P) E2 and CP860 IP phones.
Web User Interface: