Yealink SIP-T48G

Configuring Basic Features
315
Parameters
Permitted Values
Default
Features->Forward&DND->Forward->No Answer Forward->On Code
Phone User Interface:
Menu->Features->Call Forward->No Answer Forward->On Code
account.X.timeout_fwd.off_code
String within 32
characters
Blank
Description:
Configures the no answer forward off code to deactivate the server-side no answer
forward feature for account X. The IP phone will send the no answer forward off code
to the server when you deactivate no answer forward feature for account X on the IP
phone.
X ranges from 1 to 16 (for SIP-T48G/T46G/T29G)
X ranges from 1 to 12 (for SIP-T42G)
X ranges from 1 to 6 (for SIP-T41P/T27P)
X ranges from 1 to 3 (for SIP-T40P/T23P/T23G)
X ranges from 1 to 2 (for SIP-T21(P) E2)
Example:
account.1.timeout_fwd.off_code = *77
Note: It works only if the value of the parameter “features.fwd_mode” is set to 1
(Custom). It is not applicable to SIP-T19(P) E2 and CP860 IP phones.
Web User Interface:
Features->Forward&DND->Forward->No Answer Forward ->Off Code
Phone User Interface:
Menu->Features->Call Forward->No Answer Forward->Off Code
features.forward.emergency.enable
0 or 1
0
Description:
Enables or disables the incoming calls from some authorized numbers not to be
forwarded when the call forward feature is enabled.
0-Disabled
1-Enabled
Web User Interface:
Features->Forward&DND->Forward->Forward Emergency
Phone User Interface:
None
features.forward.emergency.authorized_number
String within 511
Blank