Yealink SIP-T48G

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
316
Parameters
Permitted Values
Default
characters
Description:
Configures the authorized numbers not to be forwarded even if call forward feature
is enabled.
Multiple numbers are separated by commas.
Example:
features.forward.emergency.authorized_number = 123,124
Note: It works only if the value of the parameter
“features.forward.emergency.enable” is set to 1 (Enabled).
Web User Interface:
Features->Forward&DND->Forward->Forward Authorized Numbers
Phone User Interface:
None
forward.always.enable
0 or 1
0
Description:
Triggers the always forward feature to on or off.
0-Off
1-On
If it is set to 1 (On), incoming calls are forwarded to the destination number
immediately.
Note: For Yealink IP phones (except SIP-T19(P) E2 and CP860), it works only if the
value of the parameter “features.fwd_mode” is set to 0 (Phone).
Web User Interface:
Features->Forward&DND->Forward->Always Forward->On/Off
Phone User Interface:
Menu->Features->Call Forward->Always Forward->Always Forward
forward.always.target
String within 32
characters
Blank
Description:
Configures the destination number of the always forward for the IP phone.
Note: For Yealink IP phones (except SIP-T19(P) E2 and CP860), it works only if the
value of the parameter “features.fwd_mode” is set to 0 (Phone).
Web User Interface:
Features->Forward&DND->Forward->Always Forward->Target