Yealink SIP-T48G

Configuring Basic Features
317
Parameters
Permitted Values
Default
Phone User Interface:
Menu->Features->Call Forward->Always Forward->Forward to
forward.always.on_code
String within 32
characters
Blank
Description:
Configures the always forward on code to activate the server-side always forward
feature. The IP phone will send the always forward on code and the pre-configured
destination number to the server when you activate always forward feature on the IP
phone.
Example:
forward.always.on_code = *72
Note: For Yealink IP phones (except SIP-T19(P) E2 and CP860), it works only if the
value of the parameter “features.fwd_mode” is set to 0 (Phone).
Web User Interface:
Features->Forward&DND->Forward->Always Forward->On Code
Phone User Interface:
Menu->Features->Call Forward->Always Forward->On Code
forward.always.off_code
String within 32
characters
Blank
Description:
Configures the always forward off code to deactivate the server-side always
forward feature. The IP phone will send the always forward off code to the server
when you deactivate always forward feature on the IP phone.
Example:
forward.always.off_code = *73
Note: For Yealink IP phones (except SIP-T19(P) E2 and CP860), it works only if the
value of the parameter “features.fwd_mode” is set to 0 (Phone).
Web User Interface:
Features->Forward&DND->Forward->Always Forward->Off Code
Phone User Interface:
Menu->Features->Call Forward->Always Forward->Off Code
forward.busy.enable
0 or 1
0
Description:
Triggers the busy forward feature to on or off.