Yealink SIP-T48G

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
378
For more information on calling line identification presentation, refer to Calling and
Connected Line Identification Presentation on Yealink IP Phones.
Procedure
CLIP can be configured using the configuration files or locally.
Configuration File
<MAC>.cfg
Configure the presentation of
the caller identity.
Parameter:
account.X.cid_source
Specify whether to process
Privacy header field.
Parameter:
account.X.cid_source_privacy
Specify whether to process the
P-Preferred-Identity (PPI)
header for caller identity
presentation.
Parameter:
account.X.cid_source_ppi
Local
Web User Interface
Configure the presentation of
the caller identity.
Navigate to:
http://<phoneIPAddress>/servl
et?p=account-adv&q=load&ac
c=0
Details of the Configuration Parameter:
Parameter
Permitted Values
Default
account.X.cid_source
0, 1, 2, 3, 4 or 5
0
Description:
Configures the presentation of the caller identity when receiving an incoming call for
account X.
0-FROM
1-PAI
2-PAI-FROM
3-RPID-PAI-FROM
4-PAI-RPID-FROM