Yealink SIP-T48G

Configuring Basic Features
379
Parameter
Permitted Values
Default
5-RPID-FROM
X ranges from 1 to 16 (for SIP-T48G/T46G/T29G)
X ranges from 1 to 12 (for SIP-T42G)
X ranges from 1 to 6 (for SIP-T41P/T27P)
X ranges from 1 to 3 (for SIP-T40P/T23P/T23G)
X ranges from 1 to 2 (for SIP-T21(P) E2)
X is equal to 1 (for SIP-T19(P) E2/CP860)
Web User Interface:
Account->Advanced->Caller ID Source
Phone User Interface:
None
account.X.cid_source_privacy
0 or 1
1
Description:
Enables or disables the IP phone to process Privacy header field in the SIP message
for account X.
0-Disabled
1-Enabled
X ranges from 1 to 16 (for SIP-T48G/T46G/T29G)
X ranges from 1 to 12 (for SIP-T42G)
X ranges from 1 to 6 (for SIP-T41P/T27P)
X ranges from 1 to 3 (for SIP-T40P/T23P/T23G)
X ranges from 1 to 2 (for SIP-T21(P) E2)
X is equal to 1 (for SIP-T19(P) E2/CP860)
Web User Interface:
None
Phone User Interface:
None
account.X.cid_source_ppi
0 or 1
1
Description:
Enables or disables the IP phone to process the P-Preferred-Identity (PPI) header for
caller identity presentation when receiving an incoming call for account X.
0-Disabled
1-Enabled