Yealink SIP-T48G

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
382
account.X.cp_source
Specify whether to process
Privacy header field.
Parameter:
account.X.cid_source_privacy
Details of the Configuration Parameter:
Parameter
Permitted Values
Default
account.X.cp_source
0, 1 or 2
0
Description:
Configures the presentation of the callee’s identity for account X.
0-PAI-RPID
1-Dialed Digits
2-RFC 4916
When the RFC 4916 is enabled on the IP phone, the caller sends the SIP request
message which contains the from-change tag in the Supported header. The caller
then receives an UPDATE message from the callee, and displays the identity in the
“From” header.
X ranges from 1 to 16 (for SIP-T48G/T46G/T29G)
X ranges from 1 to 12 (for SIP-T42G)
X ranges from 1 to 6 (for SIP-T41P/T27P)
X ranges from 1 to 3 (for SIP-T40P/T23P/T23G)
X ranges from 1 to 2 (for SIP-T21(P) E2)
X is equal to 1 (for SIP-T19(P) E2/CP860)
Web User Interface:
None
Phone User Interface:
None
account.X.cid_source_privacy
0 or 1
1
Description:
Enables or disables the IP phone to process Privacy header field in the SIP message
for account X.
0-Disabled
1-Enabled
X ranges from 1 to 16 (for SIP-T48G/T46G/T29G)