Yealink SIP-T48G

Configuring Basic Features
397
programablekey.X.value/
expansion_module.X.key.Y.value
linekey.X.label/
programablekey.X.label/
expansion_module.X.key.Y.label
Local
Web User Interface
Assign an intercom key.
Navigate to:
http://<phoneIPAddress>/servlet
?p=dsskey&q=load&model=0
Phone User Interface
Assign an intercom key.
Intercom Key
For more information on how to configure the DSS Key, refer to Appendix D: Configuring
DSS Key on page 796.
Details of Configuration Parameters:
Parameters
Permitted Values
Default
linekey.X.type/
programablekey.X.type/
expansion_module.X.key.Y.type
14
Refer to the following
content
Description:
Configures a DSS key as an intercom key.
The digit 14 stands for the key type Intercom.
For line keys:
X ranges from 1 to 29 (for SIP-T48G)
X ranges from 1 to 27 (for SIP-T46G/T29G)
X ranges from 1 to 15 (for SIP-T42G/T41P)
X ranges from 1 to 21 (for SIP-T27P)
X ranges from 1 to 3 (for SIP-T40P/T23P/T23G)
X ranges from 1 to 2 (for SIP-T21(P) E2)
For programable keys:
X=1-6, 9, 13 (for CP860)
For ext keys:
X ranges from 1 to 6, Y ranges from 1 to 20, 22 to 40 (Ext key 21 cannot be
configured).
Example:
linekey.1.type = 14