Yealink SIP-T48G

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
398
Parameters
Permitted Values
Default
Default:
For line keys:
For SIP-T48G IP phones:
The default value of the line key 1-16 is 15, and the default value of the line key 17-29
is 0.
For SIP-T46G/T29G IP phones:
The default value of the line key 1-16 is 15, and the default value of the line key 17-27
is 0.
For SIP-T42G IP phones:
The default value of the line key 1-12 is 15, and the default value of the line key 13-15
is 0.
For SIP-T41P IP phones:
The default value of the line key 1-6 is 15, and the default value of the line key 7-15 is
0.
For SIP-T27P IP phones:
The default value of the line key 1-6 is 15, and the default value of the line key 7-21 is
0.
For SIP-T40P/T23P/T23G/T21(P) E2 IP phones:
The default value is 15.
For programable keys:
For CP860 IP phones:
When X=1, the default value is 28 (History).
When X=2, the default value is 61 (Directory).
When X=3, the default value is 5 (DND).
When X=4, the default value is 30 (Menu).
When X=5, the default value is 28 (History).
When X=6, the default value is 61 (Directory).
When X=9, the default value is 33 (Status).
When X=13, the default value is 0 (NA).
For ext keys:
When Y=1, the default value is 37 (Switch).
When Y= 2 to 20, 22 to 40, the default value is 0 (NA).
Note: It is not applicable to SIP-T19(P) E2 IP phones.
Web User Interface:
DSSKey->Line key/Programable Key->Type
Phone User Interface: