Yealink SIP-T48G Administrator's Guide

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
402
four configuration options for incoming intercom calls:
Accept Intercom
Accept Intercom allows the IP phone to answer an incoming intercom call.
Intercom Mute
Intercom Mute allows the IP phone to mute the microphone for incoming intercom calls.
Intercom Tone
Intercom Tone allows the IP phone to play a warning tone before answering an intercom
call.
Intercom Barge
Intercom Barge allows the IP phone to automatically answer an incoming intercom call
while an active call is in progress. The active call will be placed on hold.
If you disable this feature, the IP phone will handle an incoming intercom call like a
waiting call while there is already an active call on the IP phone.
Procedure
Incoming intercom calls can be configured using the configuration files or locally.
Configuration File
<y0000000000xx>.cfg
Configure incoming intercom call
feature.
Parameters:
features.intercom.allow
features.intercom.mute
features.intercom.tone
features.intercom.barge
Local
Web User Interface
Configure incoming intercom call
feature.
Navigate to:
http://<phoneIPAddress>/servlet
?p=features-intercom&q=load
Phone User Interface
Configure incoming intercom call
feature.
Details of Configuration Parameters:
Parameters
Permitted Values
Default
features.intercom.allow
0 or 1
1

Yealink SIP-T48G Specifications

General

Expansion module support	Yes
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Volume control	-
Display diagonal	7 \
Display resolution	800 x 480 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	6
AC adapter input voltage	100 - 240 V
Number of handles included	1 pc(s)

Weight and Dimensions

Width	266 mm
Height	185 mm