Yealink SIP-T48G

Configuring Advanced Features
435
Parameters
Permitted Values
Default
Description:
Configures the IP address or domain name of the LDAP server.
Example:
ldap.host = 192.168.1.20
Note: It is not applicable to SIP-T19(P) E2 IP phones.
Web User Interface:
Directory->LDAP->Server Address
Phone User Interface:
None
ldap.port
Integer from 1 to
65535
389
Description:
Configures the port of the LDAP server.
Example:
ldap.port = 389
Note: It is not applicable to SIP-T19(P) E2 IP phones.
Web User Interface:
Directory->LDAP->Port
Phone User Interface:
None
ldap.base
String within 99
characters
Blank
Description:
Configures the LDAP search base which corresponds to the location of the LDAP
phone book from which the LDAP search request begins. The search base narrows
the search scope and decreases directory search time.
Example:
ldap.base = dc=yealink,dc=cn
Note: It is not applicable to SIP-T19(P) E2 IP phones.
Web User Interface:
Directory->LDAP->Base
Phone User Interface:
None