Yealink SIP-T48G

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
434
Parameters
Permitted Values
Default
Phone User Interface:
None
ldap.number_filter
String within 99
characters
Blank
Description:
Configures the search criteria for LDAP contact numbers look up.
The “*” symbol in the filter stands for any number. The “%” symbol in the filter stands
for the number prefix entered by the user.
Example:
ldap.number_filter = (|(telephoneNumber=%)(mobile=%)(ipPhone=%))
When the number prefix of the telephoneNumber, mobile or ipPhone of the contact
record matches the search criteria, the record will be displayed on the LCD screen.
Note: It is not applicable to SIP-T19(P) E2 IP phones.
Web User Interface:
Directory->LDAP->LDAP Number Filter
Phone User Interface:
None
ldap.tls_mode
0, 1 or 2
0
Description:
Configures the connection mode between the LDAP server and the IP phone.
0-LDAP—Unencrypted connection between LDAP server and the IP phone (port 389
is used by default).
1-LDAP TLS Start—TLS/SSL connection between LDAP server and the IP phone (port
389 is used by default).
2-LDAPs—TLS/SSL connection between LDAP server and the IP phone (port 636 is
used by default).
Note: It is not applicable to SIP-T19(P) E2 IP phones.
Web User Interface:
Directory->LDAP->LDAP TLS Mode
Phone User Interface:
None
ldap.host
IP address or
domain name
Blank