Yealink SIP-T48G

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
476
capability. Call pull feature allows users to retrieve an existing call from another shared
phone that is in active or public hold status.
If the call is placed on public hold, the held call is available for any shared party to
retrieve. If the call is placed on private hold, the held call is only available for the hold
party to retireve. You need to configure either the private hold soft key or a private hold
key before you place the call on private hold.
Procedure
SCA can be configured using the configuration files or locally.
Configuration File
<MAC>.cfg
Configure the registration line
type.
Parameters:
account.X.shared_line
Configure the call pull feature
access code.
Parameters:
account.X.shared_line_callpull_c
ode
<y0000000000xx>.cfg
Configure the private hold soft
key.
Parameters:
phone_setting.custom_softkey_e
nable
custom_softkey_talking.url
Assign a private hold key.
Parameters:
linekey.X.type/
expansion_module.X.key.Y.type
linekey.X.label/
expansion_module.X.key.Y.label
Local
Web User Interface
Configure the registration line
type.
Configure the call pull feature
access code.
Configure the number of DSS
keys to be assigned
automatically.
Navigate to:
http://<phoneIPAddress>/servlet