Configuring Advanced Features
509
The label will appear on the LCD screen when sending the RTP multicast.
4. Click Confirm to accept the change.
To configure a multicast paging key via web user interface:
1. Click on DSSKey->Line Key.
2. In the desired DSS key field, select Multicast Paging from the pull-down list of Type.
3. Enter the multicast IP address and port number in the Value field.
The valid multicast IP addresses range from 224.0.0.0 to 239.255.255.255.
4. (Optional.) Enter the string that will appear on the LCD screen in the Label field.
5. Click Confirm to accept the change.
To Next Page
Loading...
