Yealink SIP-T48G - Page 537

Configuring Advanced Features
517
</Text>
<YealinkIPPhoneText>
When the user presses the URL record key for the second time, the IP phone sends an
HTTP GET message to the server, and then the server will respond with a 200 OK
message.
Example of a 200 OK message:
<YealinkIPPhoneText>
<Title>
</Title>
<Text>
The recording session is successfully stopped.
</Text>
<YealinkIPPhoneText>
Procedure
Call recording key can be configured using the configuration files or locally.
Configuration File
<y0000000000xx>.cfg
Assign a record key.
Parameters:
linekey.X.type/
expansion_module.X.key.Y.type
Assign a URL record key.
Parameters:
linekey.X.type/
expansion_module.X.key.Y.type
linekey.X.value/
expansion_module.X.key.Y.value
linekey.X.label/
expansion_module.X.key.Y.label
Local
Web User Interface
Assign a record key and URL
record key.
Navigate to:
http://<phoneIPAddress>/servlet
?p=dsskey&q=load&model=0
Phone User Interface
Assign a record key and URL
record key.
Record Key
For more information on how to configure the DSS Key, refer to Appendix D: Configuring