Yealink SIP-T48G Administrator's Guide

Configuring Advanced Features
597
Details of Configuration Parameters:
Parameters
Permitted Values
Default
network.vlan.internet_port_enable
0 or 1
0
Description:
Enables or disables VLAN for the Internet (WAN) port.
0-Disabled
1-Enabled
Note: If you change this parameter, the IP phone will reboot to make the change
take effect.
Web User Interface:
Network->Advanced->VLAN->WAN Port->Active
Phone User Interface:
Menu->Settings->Advanced Settings (default password: admin)
->Network->VLAN->WAN Port->VLAN Status
network.vlan.internet_port_vid
Integer from 1 to 4094
1
Description:
Configures VLAN ID for the Internet (WAN) port.
Note: If you change this parameter, the IP phone will reboot to make the change
take effect.
Web User Interface:
Network->Advanced->VLAN->WAN Port->VID (1-4094)
Phone User Interface:
Menu->Settings->Advanced Settings (default password: admin)
->Network->VLAN->WAN Port->VID
network.vlan.internet_port_priority
Integer from 0 to 7
0
Description:
Configures VLAN priority for the Internet (WAN) port.
7 is the highest priority, 0 is the lowest priority.
Note: If you change this parameter, the IP phone will reboot to make the change
take effect.
Web User Interface:
Network->Advanced->VLAN->WAN Port->Priority

Yealink SIP-T48G Specifications

General

Expansion module support	Yes
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Volume control	-
Display diagonal	7 \
Display resolution	800 x 480 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	6
AC adapter input voltage	100 - 240 V
Number of handles included	1 pc(s)

Weight and Dimensions

Width	266 mm
Height	185 mm