Yealink SIP-T48G Administrator's Guide

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
616
Parameters
Permitted
Values
Default
Phone User Interface:
None
phone_setting.vq_rtcpxr_display_local_codec.enable
0 or 1
1
Description:
Enables or disables the phone to display Local Codec on the LCD screen.
0-Disabled
1-Enabled
Note: It works only if the value of the parameter
“phone_setting.vq_rtcpxr.states_show_on_gui.enable” is set to 1 (Enabled).
Web User Interface:
Settings->Voice Monitoring->Report options on phone->Local Codec
Phone User Interface:
None
phone_setting.vq_rtcpxr_display_remote_codec.enable
0 or 1
1
Description:
Enables or disables the phone to display Remote Codec on the LCD screen.
0-Disabled
1-Enabled
Note: It works only if the value of the parameter
“phone_setting.vq_rtcpxr.states_show_on_gui.enable” is set to 1 (Enabled).
Web User Interface:
Settings->Voice Monitoring->Report options on phone->Remote Codec
Phone User Interface:
None
phone_setting.vq_rtcpxr_display_jitter.enable
0 or 1
1
Description:
Enables or disables the phone to display Jitter on the LCD screen.
0-Disabled
1-Enabled
Note: It works only if the value of the parameter
“phone_setting.vq_rtcpxr.states_show_on_gui.enable” is set to 1 (Enabled).
Web User Interface:

Yealink SIP-T48G Specifications

General

Expansion module support	Yes
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Volume control	-
Display diagonal	7 \
Display resolution	800 x 480 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	6
AC adapter input voltage	100 - 240 V
Number of handles included	1 pc(s)

Weight and Dimensions

Width	266 mm
Height	185 mm