Yealink SIP-T48G

Configuring Advanced Features
619
Parameters
Permitted
Values
Default
1-Enabled
Note: It works only if the value of the parameter
“phone_setting.vq_rtcpxr.states_show_on_gui.enable” is set to 1 (Enabled).
Web User Interface:
Settings->Voice Monitoring->Report options on phone->MOS-CQ
Phone User Interface:
None
account.X.vq_rtcpxr.collector_name
String
within 32
character
s
Blank
Description:
Configures the host name of the central report collector that accepts voice quality
reports contained in SIP PUBLISH messages for account X.
X ranges from 1 to 16 (for SIP-T48G/T46G/T29G)
X ranges from 1 to 12 (for SIP-T42G)
X ranges from 1 to 6 (for SIP-T41P/T27P)
X ranges from 1 to 3 (for SIP-T40P/T23P/T23G)
X ranges from 1 to 2 (for SIP-T21(P) E2)
X is equal to 1 (for SIP-T19(P) E2/CP860)
Web User Interface:
Account->Advanced->VQ RTCP-XR Collector name
Phone User Interface:
None
account.X.vq_rtcpxr.collector_server_host
IPv4
Address
Blank
Description:
Configures the IP address of the central report collector that accepts voice quality
reports contained in SIP PUBLISH messages for account X.
X ranges from 1 to 16 (for SIP-T48G/T46G/T29G)
X ranges from 1 to 12 (for SIP-T42G)
X ranges from 1 to 6 (for SIP-T41P/T27P)
X ranges from 1 to 3 (for SIP-T40P/T23P/T23G)
X ranges from 1 to 2 (for SIP-T21(P) E2)
X is equal to 1 (for SIP-T19(P) E2/CP860)