Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
654
To configure IPv6 address assignment method via web user interface:
1. Click on Network->Basic.
2. Select the desired address mode (IPv6 or IPv4 & IPv6) from the pull-down list of
Mode(IPv4/IPv6).
3. In the IPv6 Config block, mark the DHCP or the Static IP Address radio box.
- If you mark the Static IP Address radio box, configure the IPv6 address and
other configuration parameters in the corresponding fields.
To Next Page
Loading...
