Yealink SIP-T48G

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
692
Parameters
Permitted
Values
Default
When Y=1, the default value is 0;
When Y=2, the default value is 8;
When Y=3, the default value is 4;
When Y=4, the default value is 4;
When Y=5, the default value is 18;
When Y=6, the default value is 9;
When Y=7, the default value is 106;
When Y=8, the default value is 103;
When Y=9, the default value is 104;
When Y=10, the default value is 102;
When Y=11, the default value is 105;
For SIP-T40P/T27P/T23P/T23G/T21(P) E2/T19(P) E2:
When Y=1, the default value is 0;
When Y=2, the default value is 8;
When Y=3, the default value is 18;
When Y=4, the default value is 9;
When Y=5, the default value is 106;
When Y=6, the default value is 103;
When Y=7, the default value is 104;
When Y=8, the default value is 102;
When Y=9, the default value is 105;
Example:
account.1.codec.1.rtpmap = 0
Web User Interface:
None
Phone User Interface:
None
account.X.ptime
0, 10, 20, 30, 40,
50 or 60
20
Description:
Configures the ptime (in milliseconds) for the codec for account X.
0-Disabled
10-10
20-20