Yealink SIP-T48G

Configuring Audio Features
693
Parameters
Permitted
Values
Default
30-30
40-40
50-50
60-60
X ranges from 1 to 16 (for SIP-T48G/T46G/T29G)
X ranges from 1 to 12 (for SIP-T42G)
X ranges from 1 to 6 (for SIP-T41P/T27P)
X ranges from 1 to 3 (for SIP-T40P/T23P/T23G)
X ranges from 1 to 2 (for SIP-T21(P) E2)
X is equal to 1 (for SIP-T19(P) E2/CP860)
Example:
account.1.ptime = 20
Web User Interface:
Account->Advanced->PTime(ms)
Phone User Interface:
None
To configure the codecs to use and adjust the priority of the enabled codecs on a
per-line basis via web user interface:
1. Click on Account->Codec.
2. Select the desired account from the pull-down list of Account.
3. Select the desired codec from the Disable Codecs column and then click .
The selected codec appears in the Enable Codecs column.
4. Repeat the step 4 to add more codecs to the Enable Codecs column.
5. To remove the codec from the Enable Codecs column, select the desired codec
and then click .