Yealink SIP-T48G

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
758
upload (in seconds) to the
provisioning server.
Configure whether the log files on
the provisioning server are
overwritten or appended.
Configure the maximum size of the
log files on the provisioning server.
Configure the phone to stop log
upload or delete the old log when
the log on the provisioning server
reaches the max size.
Configure the waiting time before
the phone uploads the log file to the
provisioning server.
Navigate to:
http://<phoneIPAddress>/servlet?p
=settings-config&q=load
Configure the access URL of the
provisioning server.
Navigate to:
http://<phoneIPAddress>/servlet?p
=settings-autop&q=load
Details of Configuration Parameters:
Parameters
Permitted Values
Default
syslog.mode
0, 1 or 2
0
Description:
Configures the IP phone to export log files to the local system, syslog server or an
FTP/TFTP Server (provisioning server).
0-Local
1-Server
2-FTP/TFTP Server
Note: If you change this parameter, the IP phone will reboot to make the change
take effect.
Web User Interface:
Settings->Configuration->Export System Log
Phone User Interface: