Yealink SIP-T48G

Troubleshooting
759
Parameters
Permitted Values
Default
None
syslog.log_upload_period
Integer from 30 to
2592000
30
Description:
Configures the period of the log upload (in seconds) to the provisioning server.
Example:
syslog.log_upload_period = 60
Note: It works only if the value of the parameter “syslog.mode” is set to 2 (FTP/TFTP
Server). If you change this parameter, the IP phone will reboot to make the change
take effect.
Web User Interface:
Settings->Configuration->Upload Period(30~2592000)s
Phone User Interface:
None
syslog.ftp.post_mode
1 or 2
1
Description:
Configures whether the log files on the provisioning server are overwritten or
appended.
1-Post Append
2-Post Stor (not applicable to TFTP Server)
If it is set to 1 (Post Append), the log files on the provisioning server are appended.
If it is set to 2 (Post Stor), the log files on the provisioning server are overwritten.
Note: It works only if the value of the parameter “syslog.mode” is set to 2 (FTP/TFTP
Server). If you change this parameter, the IP phone will reboot to make the change
take effect.
Web User Interface:
Settings->Configuration->Post Mode
Phone User Interface:
None
syslog.ftp.max_logfile
Integer from 200 to
65535
512