Yealink SIP-T48G

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
760
Parameters
Permitted Values
Default
Description:
Configures the maximum size of the log files on the provisioning server.
Example:
syslog.ftp.max_logfile = 511
Note: It works only if the value of the parameter “syslog.mode” is set to 2 (FTP/TFTP
Server). If you change this parameter, the IP phone will reboot to make the change
take effect.
Web User Interface:
Settings->Configuration->Append Limit Size(200~65535)K
Phone User Interface:
None
syslog.ftp.append_limit_mode
1 or 2
1
Description:
Configures the phone to stop upload log or delete the old log when the log on the
provisioning server reaches the max size.
1-Append Delete
2-Append Stop
Note: It works only if the value of the parameter “syslog.mode” is set to 2 (FTP/TFTP
Server). If you change this parameter, the IP phone will reboot to make the change
take effect.
Web User Interface:
Settings->Configuration->Append Limit Mode
Phone User Interface:
None
syslog.bootlog_upload_wait_time
Integer from 1 to
86400
120
Description:
Configures the waiting time (in seconds) before the phone uploads the log file to
the provisioning server.
Example:
syslog.bootlog_upload_wait_time = 121
Note: It works only if the value of the parameter “syslog.mode” is set to 2 (FTP/TFTP
Server). If you change this parameter, the IP phone will reboot to make the change