YOKOGAWA ADMAG AXR - 2.4 Installation Location Precautions

<2. HANDLING PRECAUTIONS>
2-2
IM 01E30D01-01EN
2.4 Installation Location
Precautions
Select the installation location with consideration
to the following items to ensure long-term stable
operation of the instrument.
 Ambient Temperature:
Avoid installing the instrument in locations
withconstantlyuctuatingtemperatures.Ifthe
location is subject to radiant heat from the plant,
provide heat insulation or improve ventilation.
 Atmospheric Condition:
Avoid installing the instrument in a corrosive
atmosphere. In situations where this is
unavoidable, consider ways to improve
ventilation and to prevent rainwater from
entering and being retained in the conduit
pipes.
 Vibrations or Shocks:
Avoid installing the instrument in a place subject
to shocks or vibrations.
 Explosion proof type:
Explosion proof types can be installed in
hazardous areas according to the types of
gasesforwhichtheyarecertied.Readthe
description in Chapter 14 and “INSTALLATION
AND OPERATING PRECAUTIONS FOR TIIS
FLAMEPROOF EQUIPMENT” at the end of this
manual.