12-23
IM 01E30D01-01EN
    <12.  OUTLINE>
●FlameproofPackingAdapterforTIISFlameproofType(OptionalcodeG11orG32)
T1
T2
L
18
(0.71)
G
F
Adapter body (M. Screw)
*Packing
(Choose from the table below 
depend on cable outside diameter)
D
C
16.5 (0.65)
Unit: mm (approx. inch)
F1222.ai
Cable (user’s scope)
B. coupling
O-Ring
Clamp nut
Clamp ring
Packing gland
Union nut
Washer
O-Ring
O-Ring
Hexagon socket set screw
Packing (*)
Hexagon socket set screw
Packing case
O-Ring
Nominal diameter Dimension
Cable outer diameter
Packing diameter
Identication
mark
Weight
kg
(lb)
Parts No.
T1 T2 C D L F G
G 1/2 G 1/2
35
(1.38)
39
(1.54)
94.5
(3.72)
ø8.0 to ø10.0  
(0.31 to 0.39)
ø10.0(0.39)
ø20.0
(0.79)
16 8-10
0.26
(0.57)
G9601AM*
ø10.0 to ø12.0  
(0.39 to 0.47)
ø12.0(0.47) 16 10-12
*: G 11: 1 unit
G 11 with G 32: 2 units
●Unlessotherwisespecied,differenceinthedimensionsarethefollowingtable.
General tolerance in the dimensional outline drawing.
Unit : mm (approx.inch)
Category of basic dimension
Tolerance
Category of basic dimension
Tolerance
Above Equal or below Above Equal or below
  3 (0.12)   ±0.7 (±0.03)   500 (19.69)   630 (24.80)   ±5.5 (±0.22)
  3 (0.12)   6 (0.24)   ±0.9 (±0.04)   630 (24.80)   800 (31.50)   ±6.25 (±0.25)
  6 (0.24)   10 (0.39)   ±1.1 (±0.04)   800 (31.50)   1000 (39.37)   ±7.0 (±0.28)
  10 (0.39)   18 (0.71)   ±1.35 (±0.05)   1000 (39.37)   1250 (49.21)   ±8.25 (±0.32)
  18 (0.71)   30 (1.18)   ±1.65 (±0.06)   1250 (49.21)   1600 (62.99)   ±9.75 (±0.38)
  30 (1.18)   50 (1.97)   ±1.95 (±0.08)   1600 (62.99)   2000 (78.74)   ±11.5 (±0.45)
  50 (1.97)   80 (3.15)   ±2.3 (±0.09)   2000 (78.74)   2500 (98.43)   ±14.0 (±0.55)
  80 (3.15)   120 (4.72)   ±2.7 (±0.11)   2500 (98.43)   3150 (124.02)   ±16.5 (±0.65)
  120 (4.72)   180 (7.09)   ±3.15 (±0.12)
  180 (7.09)   250 (9.84)   ±3.6 (±0.14)
  250 (9.84)   315 (12.40)   ±4.05 (±0.16)
  315 (12.40)   400 (15.75)   ±4.45 (±0.18)
  400 (15.75)   500 (19.69)   ±4.85 (±0.19)
Remarks: The numeric is based on criteria of tolerance class IT18 in JIS B 0401.
12.8 SIZINGDATA(Measurableowvelocityisfrom0m/s.)
Flow velocity
m/s
*Measurable flow velocity is from 0 m/s.
SI Units  Size: mm
English Units  Size: inch   
Flow velocity
ft/s
1
1.5
2.5
2
3
4
6
8
F1223.ai
33
5.0
1.0
10
2.0
10,000
1.0
1,000
100
10
Flow rate (GPM)
* Measurable flow velocity is from 0 ft/s.
25
40
50
80
100
0.5
1.0
5.0
10.0
150
200
65
0.3
Flow rate (m
3
/h)
1,000
100
10
0.1
0.01
1