<14.  EXPLOSION PROTECTED TYPE INSTRUMENT>
14-6
IM 01E30D01-01EN
(3) Operation
For Division
WARNING
 
WARNING :  OPEN CIRCUIT BEFORE 
REMOVING COVER. 
OUVRIR LE CIRCUIT AVANT 
D’ENLEVER LE COUVERCLE.
• Takecarenottogeneratemechanical
spark when access to the instrument and 
peripheral devices in hazardous locations.
For Zone
WARNING
 
WARNING :  AFTER DE-ENERGIZING, DELAY 
5 MINUTES BEFORE OPENING. 
APRÉS POWER-OFF, 
ATTENDRE 5 MINUTES AVANT 
D’OUVRIR.
• Takecarenottogeneratemechanical
spark when access to the instrument and 
peripheral devices in hazardous locations.
(4) Maintenance and Repair
WARNING
 
Theinstrumentmodicationorpartsreplacement
by other than authorized representative 
of YOKOGAWA Electric Corporation or 
YOKOGAWA Corporation of AMERICA is 
prohibited and will void Canadian Standards 
ExplosionproofCertication.
14.4 IECEx
WARNING
 
Only trained persons use this instrument in 
industrial locations.
(1)  Technical Data
Applicable Standard:
  IEC 60079-0: 2011, IEC 60079-1: 2014,  
IEC 60079-7: 2006, IEC 60079-11: 2011,  
IEC 60079-31: 2013
Certicate:IECExDEK11.0053
Type of Gas Atmosphere Protection
Type of Protection:
Ex db e ia IIC T6…T4 Gb
SpecicationofProtection:
ElectrodeCircuit:Um=250V
Power Supply/Current Output:
42Vdcmax.,4to20mA,Um=250V
Digital Output:  ON; 2Vdc, 120mA max.,  
OFF; 30Vdc max., 4mA,  
Um=250V
Excitation Circuit: 29 V max.
Enclosure: IP66/IP67
Process Temperature:
Temperature 
Class
Maximum Process 
Temperature
Minimum Process 
Temperature
T6 +70°C (+158°F) –30°C (–22°F)
T5 +85°C (+185°F) –30°C (–22°F)
T4 +130°C (+266°F) –30°C (–22°F)
Ambient Temp.: –30°C to +55°C 
  (–22°F to +131°F)
Type of Dust Atmosphere Protection
Type of Protection:
Ex tb IIIC T90°C, T110°C, T130°C Db
SpecicationofProtection:
ElectrodeCircuit:Um=250V
Power Supply/Current Output:
42Vdcmax.,4to20mA,Um=250V
Digital Output:  ON; 2Vdc, 120mA max.,  
OFF; 30Vdc max., 4mA,  
Um=250V
Excitation Circuit: 29 V max.
Enclosure: IP66/IP67
Process Temperature:
Maximum Surface 
Temperature
Maximum Process 
Temperature
Minimum Process 
Temperature
T90°C (+194°F) +70°C (+158°F) –30°C (–22°F)
T110°C (+230°F) +85°C (+185°F) –30°C (–22°F)
T130°C (+266°F) +130°C (+266°F) –30°C (–22°F)
Ambient Temp.: –30°C to +55°C
  (–22°F to +131°F)