YOKOGAWA ADMAG AXR - Page 167

12-12
IM 01E30D01-01EN
<12. OUTLINE>
Note: AnexclusiveUser’sManualmightbeattachedforproductswhosesufxcodeoroptionalcodescontaincode“Z”.
Please read it along with their standard manual.
*1: Forexplosionprooftypes,specifytypesofexplosionproofcerticationusingtheoptionalcodes.
FortheTIISameprooftype,selectoptionalcodeG11.AvailableonlyforJISG1/2femaleelectricalconnections.
 AvailableonlyforwiringofusingaameproofpackingadapterapprovedbyYokogawa.
 TheameproofmetalconduitwiringforTIISameprooftypeisnotpermitted.
*2: Usersmustconsiderthecharacteristicsofselectedwettedpartsmaterialandinuenceofprocessuids.
Theuseofinappropriatematerialscanresultintheleakageofcorrosiveprocessuidsandcauseinjurytopersonneland/ordamage
to plant facilities. It is also possible that the instrument itself can be damaged and that fragments from the instrument can contami-
natetheuser’sprocessuids.Beverycarefulwithhighlycorrosiveprocessuidssuchashydrochloricacid,sulfuricacid,hydrogen
sulde,sodiumhypochlorite,andhigh-temperaturesteam(150°C[302°F]orabove).ContactYokogawafordetailedinformationof
the wetted parts material.
*3: Available only for metal piping.
*4: Mating dimensions are based on standards as follow:
ANSI:ASME B 16.5, DIN: DIN 2501, JIS:JIS B 2220 and JIS G 3443-2
*5: Allowableuidpressureshouldalsobelimitedaccordingtouidtemperatureandpressure.
*6: Even when DIN PN10, 16, or 40 is required for a model of size 25 to 50 mm (1.0 to 2.0 in.), select PN40 (Process connection codes:
BD4) because there is no difference in the dimensions of the mating faces.
Even when DIN PN10 or 16 is required for a model of size 65 to 150 mm (2.5 to 6.0 in.), select PN16 (Process connection codes: BD2)
because there is no difference in the dimensions of the mating faces.
*7: Thedimensionsoflaylengthcode1arethesameasthoseofthePFAliningstandardlaylength(laylengthcode1)intheAXFseries.
Fordetails,read“EXTERNALDIMENSIONS”.
*8: For an explosion proof type except for TIIS, select “ANSI 1/2 NPT female” or “ISO M20 × 1.5 female”.
 FortheTIISameprooftype,select“JISG1/2female”andoptionalcodeG11.
*9: Selectfromamongtheguresattheright.
1 2 N
F1207.ai
*10: InthecaseoftheTIISameprooftype,select“withindicator”(code1or2).
*11: Output signal code “-E”: HART 5.(Output signal code “-J” is recommended for HART communication.)
*12: Output signal code “-J”: HART 5 or HART 7 selectable. Specify HART 5 or HART 7 when ordering.