7-78
IM AQ6370D-01EN
Loading the Data Logging Results
1.
Press ADVANCE and then the DATA LOGGING soft key. The soft key menu for
data logging appears.
2.
Press the LOGGING DATA LOAD soft key. The soft key menu for loading the
data and TRACELIST appear.
For the operating procedure, see step 4 and subsequent steps in “Loading the
Logging Data” of section 8.10.
Deleting the Logging Data
1.
Press ADVANCE and then the DATA LOGGING soft key. The soft key menu for
data logging appears.
2.
Press the LOGGING DATA CLEAR soft key. The EXECUTE and CANCEL soft
keys appear.
3.
Press the EXECUTE soft key. The logging data is deleted.
If you do not want to delete the logging data, press the CANCEL soft key. The
previous soft key menu will return.
Note
This function is the same as the deletion performed for the data deletion confirmation message
that appears when data logging is executed.
7.15 Analysis Data Logging
To Next Page
Loading...
