8-11
IM AQ6370D-01EN
Saving/Loading Data
8
Selecting a Trace from the Loaded Data
7.
Press the FILE->TRACE @ soft key (where @ is the currently selected trace
number). The trace selection menu is displayed.
8.
Press the soft key corresponding to the trace to be assigned.
Executing the Load
9.
Press the EXECUTE soft key. The file is loaded and displayed as the specified
trace number.
When the RETURN soft key is pressed, the file is not loaded. The screen returns
to the previous stage.
Note
After loading waveform files (*.WV6) that were saved by the AQ6370 under the CHOP MODE
of “CHOP,” the sensitivity setting becomes “SWITCH.”
8.3 Saving/Loading Displayed Data
To Next Page
Loading...
