10-16
IM AQ6370D-01EN
No. Message Cause of Warning
307 Unsuitable Write item All data items were OFF at execution of “WRITE DATA”.
320 Undefined variable A command containing an undefined variable was executed.
321 Variable unit mismatch The unit of each variable does not agree within a command
containing two or more variables.
322 Overflow An overflow occurred in an arithmetic operation.
323 Undefined marker variable A command containing a marker-value variable was executed when
no marker had been displayed.
324 Invalid marker variable A command containing the corresponding variable was executed at
a time other than immediately after execution of a spectrum width
search, peak search, etc.
325 Undefined line number GOTO command’s jumping destination is a number other than 1 to
200.
326 F1 greater than F2 F1>F2 when the “IF F1 ≤ @@@@@ ≤ F2” command was executed.
340 Printer paper empty No printer paper
341 Printer head up No print is made because the printer’s head-up lever is raised.
345 Option does not respond No response from an external device.
346 Option is not connected No external device is connected.
347 GPIB2 not system controller System controller connected to the GP-IB2 port has been set to an
external computer.
360 Disk full No file can be created due to insufficient free space on the USB
storage medium.
361 USB Storage not inserted USB storage medium not inserted.
362 USB Storage is write protected The USB storage device is write protected.
363 USB Storage not initialized USB storage not initialized. Or, it has been formatted in a format not
supported by this instrument.
364 Directory full Directory is full, therefore no file can be created.
365 File not found The specified file cannot be read because it has not been found. Or,
the file does not exist on the disk.
366 File is write protected The file is specified to be read only, so that it cannot be rewritten or
deleted.
367 No data No data to store.
368 File is not a trace file A file cannot be read because it is not a trace file.
369 Illegal file name A file cannot be saved due to an incorrect file name.
370 File type mismatch Loading or saving the file is not possible because the specified type
of file does not match that of the command.
380 Undefined program An attempt was made to run a program that is not defined.
381 Syntax error Command incorrect (a program has been rewritten for some
reason).
10.10 Warning Display Function
To Next Page
Loading...
